Ec Declaration Of Conformity - GreenWorks 24077 Manual Del Usuario

LIMITED WARRANTY
Globe Tools warrants this outdoor product to be free of
defects in material or workmanship for 24 months from
the date of purchase by the original purchaser, subject to
the limitations below. Please keep your invoice as proof of
date of purchase.
This warranty is only applicable where the product is
used for personal and non-commercial purposes. This
warranty does not cover damage or liability caused by /
due to misuse, abuse, accidental or intentional acts by
user, improper handling, unreasonable use, negligence,
failure by end user to follow operating procedures outlined
in the user's manual, attempted repair by non-qualified
professional, unauthorized repair, modification, or
use of accessories and/or attachments not specifically
recommended by authorized party.
This warranty does not cover belts, brushes, bags,
bulbs or any part which ordinary wear and tear results
in required replacement during warranty period. Unless
specifically provided under applicable law, this warranty
does not cover transportation cost or consumable items
such as fuses.
This limited warranty is void if the product's original
identification (trade mark, serial number, etc.) markings
have been defaced, altered or removed or if product is
not purchased from an authorized reseller or if product is
sold AS IS and / or WITH ALL FAULTS. Subject to all
applicable local regulations, the provisions of this limited
warranty are in lieu of any other written warranty, whether
express or implied, written or oral, including any warranty
of MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. IN
NO EVENT SHALL WE BE LIABLE FOR SPECIAL,
INCIDENTAL, CONSEQUENTIAL
DAMAGES. OUR MAXIMUM LIABILITY SHALL NOT
EXCEED THE ACTUAL PURCHASE PRICE PAID BY
YOU FOR THE PRODUCT.
This warranty is valid only in the European Union,
Australia and New Zealand. Outside these areas, please
contact your authorized
Greenworks tools dealer to determine if another warranty
applies.
ENGLISH (Original Instructions)
OR INCIDENTAL

EC DECLARATION OF CONFORMITY

Name: Changzhou Globe Co., Ltd.
Address: No.65 Xinggang Road Zhonglou Zone
Changzhou, Jiangsu 213000 P.R.China
Name and address of the person authorised to compile
the technical file:
Name: Dennis Jacobson (Director of Outdoor Power
Equipment)
Address:
Globe Tools Europe
1 Etage
Schillingsrotterstr. 38
50996 Cologne
Germany
Herewith we declare that the product
Category ........................................................Blower / Vac
Model ...................................................................... 24077
Serial number ............................. See product rating label
Year of Construction ................... See product rating label
■ is in conformity with the relevant provisions of the
Machinery Directive (2006/42/EC)
■ is in conformity with the provisions of the following
other EC-Directives 2004/108/EC (EMC-Directive), and
2000/14/EC (Noise Directive) incl. modifications (2005/88/
EC)
And furthermore, we declare that
■ the following (parts/clauses of) European harmonised
standards have been used EN60335-1; IEC 60335-2-
100; EN15503; EN 62233; EN ISO 3744;EN 55014-1; EN
55014-2;
Measured sound power level LWA: 101.8 dB(A)
Guaranteed sound power level 104 dB(A)
Conformity assessment method to Annex V Directive
2000/14/EC
Place, date: Changzhou, 30/12/2011
Signature: Dennis Jacobson (BEng, CEng, MIET)
Vice president of Engineering
16