General Safety Rules - GreenWorks 24077 Manual Del Usuario

Your blower Vacuum has been engineered and
manufactured to high standard for dependability, ease of
operation, and operator safety. When properly cared for,
it will give you years of rugged, trouble-free performance.
Thank you for buying a Greenworks Tools product.

GENERAL SAFETY RULES

1. Important safety instruction
■ Please read all of the safety and operating instructions
carefully before using this product. Please pay
particular attention to all sections of this operator
manual that carry warning symbols and notices.
■ This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
■ Children should be supervised to ensure that they do
not play with the appliance.
2. Training
■ Read the instructions carefully. Be familiar with the
controls and the proper use of the appliance.
■ Never allow children to use the appliance.
■ Never allow people unfamiliar with these instructions
to use the appliance. Local Regulations may restrict
the age of the operator.
■ Never operate the appliance while people, especially
children, or pets are nearby.
■ The operator or user is responsible for accidents or
hazards occurring to other people or their property.
3. Preparation
■ While operating the appliance, always wear substantial
footwear and long trousers
■ Dress properly - Do not wear loose clothing or jewellery.
They can be caught in moving parts. Use of sturdy
gloves and substantial footwear is recommended
when working outdoors.
■ Wear protective hair covering to contain long hair.
Wear protective goggles while operating.
■ To prevent dust irritation the wearing of a face mask
is recommended.
■ Before using, check the supply and extension cord for
signs of damage and aging. Do not use the appliance
if the cord is damaged or worn.
■ Never operate the appliance with defective guards
or shields, or without safety devices, for example
collection bag in place.
■ Only use a weather proof extension cable correctly
rated to your machine.
ENGLISH (Original Instructions)
4. Operation
■ Always direct the cable to the rear away from the
appliance.
■ If the cord becomes damaged during use, disconnect
the cord from the supply immediately. DO NOT
TOUCH THE CORD BEFORE DISCONNECTING
FROM THE SUPPLY. Do not use the appliance if the
cord is damaged or worn.
■ Do not carry the appliance by the cable.
■ Avoid Dangerous Environment - Don't use appliances
in damp or wet locations.
■ Disconnect the appliance from the mains supply
whenever you leave the machine, before clearing a
blockage, before checking, cleaning or working on the
appliance. If the appliance starts to vibrate abnormally
switch it off immediately, disconnect the appliance
from the mains and inspect for obstructions or damage
to the unit.
■ Operate the appliance only in daylight or in good
artificial light.
■ Do not overreach and keep your balance at all times.
■ Always be sure of your footing on slopes.
■ Walk, never run.
■ Keep all cooling air inlets clear of debris.
■ Never blow debris in the direction of bystanders.
■ Appliance should be supplied via a residual device
with a tripping current of not more than 30mA.
5. Maintenance and storage
■ Keep all nuts, bolts and screw tight to be sure the
appliance is in safe working condition.
■ Check the appliance
deterioration.
■ Replace worn or damaged parts.
■ Use only genuine replacement parts and accessories.
■ Store Idle Appliances Indoors - When not in use,
appliances should be stored indoors in dry, and high
or locked-up place - out of reach of children.
6. Additional safety rules for blower vacuum
■ Always wear adequate protective clothing when
operating the tool to avoid injuries to face, eyes,
hands, feet, head or hearing, Use safety glasses or a
face shield, high boots or sturdy shoes, long trousers,
work gloves, a hard hat and ear defenders.
■ Do not start the tool when it is upside down or when it
is not in the operating position.
■ Switch the motor off and disconnect from power when
the tool is not being used, left unattended, being
cleaned, being moved from one place to another or
when the extension cord is entangled or damaged.
10
frequently for wear or