EnGenius EP801 Manual De Usuario página 25

Menu Operations
~49~
1. Press MENU (Right) soft key to enter menu mode while the phone is in
standby mode.
Re: You can either press
key to confirm the selected menu. Or Press the digit directly to confirm
the selected menu. For example, press
select the Ring Volume.
2. Press "1" to select KeyGuard (see Key Guard operation on page 34 ).
3. Press "2" to add, delete, edit, view and edit the phonebook (see
Phonebook instruction on page 38 ).
4. Press "3" to set Sounds settings:
a. Press "1" to select Ring Volume:
Use or to scroll through 6 options: "Off", "Low", "Medium",
"High", "Vibrate" and "Vibrate & High". Press
to save selection. Default = Medium.
b. Press "2" to select Ring Tone:
Total 8 ringers (1~8) for two scenarios: 1.Line Ring (Ringer for
incoming call) ; 2.Intercom Ring (Ringer for intercom call).
Use the or to scroll through 8 ringers, press
(Left) soft key to save selection. Default = 1.
c. Press "3" to select Key Volume when a key is pressed:
Use or to scroll through 4 options: Off, Low, Medium, and
High. Press SELECT (Left) soft key to save selection. Default =
Medium.
d. Press "4" to select Key Tone:
Use the or to scroll through 4 options: 1, 2, 3 and 4. Press
SELECT (Left) soft key to save selection. Default = 1.
5. Press "4" to set Call Settings:
a. Press "1" to set Dial Prefix:
(1) Press or
Default = Off.
(2) If "On" is selected, the handset is prompted to enter the prefix
number, up to 14 digits can be entered.
(3) Use Delete (Right) soft key to edit prefix number.
(4) Press SAVE (Left) soft key to confirm the selection.
When this feature is turned on, the LCD will prompt the user on
(5)
each outgoing phone call, the current prefix is also displayed.
(6) This feature is useful for access code, calling card, and credit
card calls, etc.
or , followed by SELECT (Left) soft
MENU (Right) soft key -3-1 to
SELECT (Left) soft key
SELECT
to turn of or off the dial prefix feature.
~50~