Battery Loading; Status Indicators - THOMSON WHP 360R Manual De Utilización

All manuals and user guides at all-guides.com
WHP360R/360RU - 16 L.
FM radio frequency wireless headphones
Set-up
Make use of the connection cable (see Fig. 3) to link the Audio source
(hi-fi system,TV set, etc.) to the transmitter's AUDIO IN de socket
Connect the jack of the mains adapter included to the DC IN
supply socket at the rear of the transmitter (see Fig. 3). Then plug the
mains adapter into a mains outlet. Insert 2 rechargeable batteries of type
@
LR 03 into the headphones compartment as shown in Fig. 2. Mind the
polarity.

Battery loading

With the connection cable included, link the transmitter's RECHARGE
4
socket to the headphones' CHARGE
•
First charge: leave the headphones in the charging position all over the
night (approximately 15 hours).
•
First use: let the batteries get completely empty (until the headphones do
no longer work), before you recharge them again.
The second and following recharging operations will take 10 hours.
Operation
1
Select the channel providing the best reception quality (A or B). Put the
headphones into operation
TUNE knob (fine tuning)
turns into green).Then adjust the headphones volume
This headphones transmitter unit has been designed to switch itself off
after two minutes if its input level drops below a certain level. This is to
comply with the current legislation on reduce the amount of radio
emissions in the environment.Therefore, to ensure that this function is not
accidentally triggered, we suggest that you set the television, audio amplifier
or DVD/CD player headphone volume level at approximately half way
(50%). Please consult your equipments user manual for details on how to
set the head/earphones volume level.

Status indicators

5
Transmitter on,
6
Charging.
14/03/03 16:38 Page 2
7
. While listening, adjust reception with the
0
to obtain a proper sound (the LED
2
2
power
!
socket.
8
9
to a suitable level.
3
.
then