Operating Mode Selection; Environmental Protection; Technical Specifications - Metabo BHA 18 LT Manual Original

7.5 Setting the direction of rotation,
engaging the transporting safety device
(switch-on lock)
Do not activate the rotation selector switch (8)
unless the motor has completely stopped!
Set the rotation selector switch (8).
See page 2:
R = Clockwise setting
L = Counter-clockwise setting
0 = Middle position: transportation safety device
(Switch-on lock) set
7.6 On/Off switch, setting the speed
Switching on, speed: press the trigger (9). The speed
can be changed by pressing in the trigger.
Switching off: release the trigger (9).
7.7

Operating mode selection

Do not activate the switch button (4) unless
the motor has completely stopped!
Select the desired operating mode by turning the
switch button (4). To turn, push in the lock (5).
Drilling
Hammer drilling
Avoid levering with the machine when a drill bit
is fitted.
7.8 Tool change with SDS chuck
Before fitting, clean tool shank and apply
special grease (accessories order no.
6.31800)! Use only SDS-plus tools.
Inserting the tool:
Turn the tool while inserting until it locks into place.
The tool is locked automatically.
Removing the tool:
Turn tool lock (2) in direction indicated by arrow (a)
and remove tool (b).
8. Maintenance
The vent slots of the machine should be cleaned
periodically.
9. Accessories
Use only genuine Metabo accessories.
Use only accessories which fulfil the requirements
and specifications listed in these operating instruc-
tions.
See page 4.
A Chargers
B Battery packs with different capacities.
Use battery packs only with voltage suitable for
your power tool.
C Metabo carrying strap
D Tools with SDS-Plus shank
E Connecting piece
F Geared chuck
G Twist drills for metal and wood
H Screwdriver bit
I Special grease (for lubricating the tool shanks)
For a complete range of accessories, see
www.metabo.com or the main catalogue.
10. Repairs
Repairs to electrical tools must be carried out by
qualified electricians ONLY!
If you have Metabo electrical tools that require repairs,
please contact your Metabo service centre. For
addresses see www.metabo.com.
You can download spare parts lists from
www.metabo.com.

11. Environmental Protection

Observe national regulations on environmentally
compatible disposal and on the recycling of disused
machines, packaging and accessories.
Battery packs must not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact with
water!
To protect the environment, do not dispose of
power tools or battery packs in household
waste. Observe national regulations on
separated collection and recycling of disused
machines, packaging and accessories.
Before disposal, discharge the battery pack in the
power tool. Prevent the contacts from short-
circuiting (e. g. by protecting them with adhesive
tape).

12. Technical Specifications

Explanatory notes on the information on page 3.
Changes due to technological progress reserved.
U = Voltage of battery pack
Ah = capacity of the battery pack
m = weight (with smallest battery pack)
n = no-load speed
1
dia. = maximum solid drill diameter
max.
ENGLISH en
11