Festo High Power LED EduTrainer Manual De Instrucciones página 32

3. Control via DALI bus
The existing DALI bus interface can be used to connect a DALI controller, allowing for integration with a
building automation system.
Connection example:
Only one type of control is possible at any given time.
You can get digital copies of the product data from the manufacturer:
OSRAM GmbH
Marcel-Breuer-Straße 6
80807 Munich
Germany
www.osram.de
The two LEDs consume 50 W of power and differ primarily in the following values:
LED Color temperature
-E1 2700 K
-E2 5000 K
32
Luminous flux Ra (CRI)
Type 6753 lm >90
Type 8511 lm >80
Warning
Damage to the light emitting surfaces can destroy the LED. Avoid damage and do
not touch the light emitting surfaces of the LEDs.
© Festo Didactic 8064070