Eliminating Malfunctions; Maintenance And Cleaning - Festo High Power LED EduTrainer Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Temperature sensor Pt100
The built-in temperature sensor Pt100 allows you to measure the reflector temperature. The change in the
resistance of the sensor can be measured using an Ohmmeter and converted using the table below.
Resistance/temperature table Pt100
Temperature
Resistor
0°C
100.00 Ω
10°C
103.90 Ω
20°C
107.79 Ω
30°C
111.67 Ω
40°C
115.54 Ω
50°C
119.40 Ω

10 Eliminating malfunctions

Problem
The circuit is not working
The light does not come on

11 Maintenance and Cleaning

The device is maintenance-free. Use a slightly damp, lint-free cleaning cloth without any abrasive, chemical,
or solvent-containing cleaning agents.
© Festo Didactic 8064070
Temperature
Resistor
60°C
123.24 Ω
70°C
127.07 Ω
80°C
130.89 Ω
90°C
134.70 Ω
100°C
138.50 Ω
110°C
142.29 Ω
Solution
• Check supply voltage
• Check the wiring.
• Check the wiring
• Check dimming level / status of drive.
• Lamp defective. Contact our Service department
Temperature
Resistor
120°C
146.06 Ω
130°C
149.82 Ω
140°C
153.58 Ω
150°C
157.31 Ω
200°C
175.84 Ω
250°C
194.07 Ω
33

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

8064069

Tabla de contenido