Commissioning - Festo High Power LED EduTrainer Manual De Instrucciones

8 Commissioning

The EduTrainer
®
The circuit is inserted and assessed with safety laboratory cables. For operation on grid voltage, ensure that
the supply voltage is not short-circuited by the switch, as this can destroy the switch.
30
is connected to the corresponding supply unit when the power supply is disconnected.
Warning
The device must only be operated on a current-limited feed unit. Maximum backup
fuse 10 A(T).
For example order number: 8023973
The device may only be operated with a connected PE conductor.
Warning
Strong optical radiation may cause severe damage to the eyes. Do not look into
the lamp when it is switched on.
Warning
Hot surface temperatures can cause burns. Allow any hot parts of the device to
cool down before touching them.
© Festo Didactic 8064070