Kettler SPEEDY Instrucciones De Montaje página 6

GB
■
Please ensure that the wheeled toy is only used in surroundings free of danger.
■
This wheeled toy does not have lights. It is dangerous to use it in the dark.
■
Caution: While assembly of the product keep off children's reach (Choking hazard
!
- contains small parts).
Handling
■
Before use always check that all screws and plug-in connections and respective safety
devices fit correctly.
■
Instruct children in the correct use of the product, and draw their attention to possible
dangers.
■
Sturdy, closed footwear must be worn when using this product.
■
This wheeled toy does not have a so-called parking brake. Therefore secure the vehicle
against rolling away. Do not leave children, who are not old enough to use the wheeled
toy, unattended on a product.
■
If this product can be adjusted please adapt it to your child's height.
■
Do not transport anything on this product.
■
Never use corrosive or abrasive substances to clean the toy. Never use substances which
may cause pollution of the environment.
■
Lubricate the bearing sleeves of the wheels and the handlebars with a few drops of oil
every two or three months.
Assembly of the toy vehicle
■
The toy vehicle must be assembled carefully by an adult person. Study the assembly
instructions carefully before beginning work. Assemble the vehicle in the exact sequen-
ce shown by the letters in the diagrams. This is essential for the safe function and use of
the toy vehicle.
■
Please note that there is always a danger of injury when working with tools or doing
manual work. Therefore please be careful when assembling this machine.
■
Ensure that your working area is free of possible sources of danger, for example don't
leave any tools lying around. Always dispose packaging material in such a way that it
may not cause any danger. There is always a risk of suffocation if children play with pla-
stic bags!
■
Bolt all the parts together loosely at first, and check that they have been assembled cor-
rectly. Tighten the locknuts by hand until resistance is felt, then use spanner to finally tigh-
ten nuts completely against resistance (locking device). Then check that all screw con-
nections have been tightened firmly. Attention: once locknuts have been unscrewed they
no longer function correctly (the locking device is destroyed), and must be replaced.
■
Please keep original packaging of this article, so that it may be used for transport at a
later date, if necessary. Goods may only be returned after prior arrangement and in
(internal) packaging, which is safe for transportation, in the original box if possible. It is
important to provide a detailed defect description / damage report!
■
For technical reasons, we reserve the right to carry out preliminary assembly work (e.g.
addition of tubing plugs).
6
All manuals and user guides at all-guides.com