Service And Storage - Solo 546 Manual De Instrucciones

Safty guidelines

5.9 Service and Storage

Caution: Before every Service, Cleaning and Storage stop the engine and remove spark plug cap, at Model 546 RT the Touch-
N-Mow® starter system has been released through an engine start without ignition, and that the safety key (item 18) has
been removed.
Take care that all screw connections are tightened.
Never store the mower with gasoline in fuel tank in a building where gasoline vapors may come in contact with open fires
or where sparks could ignite fumes.
The fuel tank should be emptied outdoors. Use suitable containers for draining gasoline.
Let the engine run until the gasoline remaining in the carburetor is depleted.
Let the engine cool off prior to storage in an enclosed area.
To avoid danger of fire, clean grass, leaves or escaping grease (oil) off engine, muffler, battery box, gear box (if existing),
and fuel tank.
On a regular basis, check the grass catching device and check the ejection shield for wear and tear and sound operation.
For safety reasons, replace worn or damaged parts.
Always wear protective gloves when working near the cutting device's vicinity.
Servicing and repairs are only to be conducted when engine is turned off and when spark plug cap is removed.
For warranty purposes and safety reasons only SOLO replacement parts should be used.
Ensure that the tank is fully drained before any assembly, disassembly or modification.
ENGLISH 10