Carrier 40VCB217FQEE Manual De Instalación Y Propietario página 19

Software Operation instructions
Electricity and fixed cost setting:
Set the peak, valley, normal price, and fixed cost according to the actual situation in the area. Click 'Set' to write the value
to the system.
'Auto or not'; If auto is selected, the system will automatically collect data at 00:00 every day. If you wish to switch to manual
collection, you will need to select the manual start date and end date. Upon clicking 'manual collect', data will be collected
best on the dates and times provided.
Gateway parameters:
Select the gateway, and write the actual ammeter pulse under 'Ammeter pulse quantity per kWh'.
For example, if the ammeter readings '200imp/kWh', it means that the ammeter pulse is 200, so write 200 under 'Ammeter
pulse quantity per kWh'.
If the mutual sensor is not used, write 1 in the mutual sensor multiple; if the mutual sensor is used, write the actual mutual
sensor multiple. For example, if the mutual sensor marked current ratio is 150/5, the actual mutual sensor multiple is 30.
Write 30 under mutual sensor multiple and click the 'Set' button to save the setting.
Peak, Valley, and Normal time setting:
The peak, valley, and normal value time can be set only once every day. The start time of the normal value time is the end
time of the valley value time. The start time of the peak value time is the end time of the normal value time. The start time
of the valley value time is the end time of the peak value time. Click the 'Set' button to save the setting.
Gateway timing:
Click the 'Automatic' button to synchronize the Gateway time
If the operation is successful, a success message will appear.
If the operation is unsuccessful, a failure message will be displayed
17