Carrier 40VCB217FQEE Manual De Instalación Y Propietario página 23

Software Operation instructions
Schedule setting includes modes such as single indoor unit setting, user setting, floor setting, and building setting. The loop
model includes no cycle, cycle in day, cycle in week, and cycle in month.
In the settings menu, fill in the corresponding schedule data, you can name the schedule by title, select the type, and then
add the building, floor, user, and indoor address. Then, fill in the corresponding operating parameters, and select the loop
mode and schedule time; click the 'Save' button to save the schedule.
For example:
Set 5th April–15th April, cycle in day, Calendar for user 'CS1'; 8:00 switch on,
18:00 switch off.
21