Carrier 40VCB217FQEE Manual De Instalación Y Propietario página 31

Preparation and Attention of Device Information Import
After obtaining the above information, you can import the device; first, set the bus configuration, after which the indoor
unit configuration can be set in case of demand for floor map configuration; the specific configuration operation is set
with reference to 3.2.11,3.2.12, and 3.2.13.
Note: After completing the information import, the computer needs to be restarted and logged into again.
Configuration issue
1. The indoor unit list should not have a mistake; if there is a mistake, the control of the indoor unit is not the target indoor
unit. The electricity consumption is not for the target indoor unit
2. Complete the setting, close the program, and restart the program. Reload the browser to correctly display the newly
imported indoor unit information.
3. Time synchronization: After the equipment is connected, time synchronization has to be performed; the time of the
converter is the same as that of the computer system
4. Protocol converter pulse set: Different manufacturers of the ammeter have different pulse numbers
29