Carrier 40VCB217FQEE Manual De Instalación Y Propietario página 34

External Interface and Property configuration
The above operation will enter the root directory of the application documents, according to the above directory to find
the file 'sysinfo.properties'. Double-click to enter the properties file.
The content of the property configuration file is as shown in the following figures
Upon selecting the Modbus IP protocol,
set BUSFLAG=1
MODBUSCOMPORT=0
BACNET_FLAG=0
Upon selecting the Bacnet IP protocol ,
set BUSFLAG=0
MODBUSCOMPORT=0
BACNET_FLAG=1
The name of the parameter in the property configuration file is 'BACNET_ DEVICE_BROADCAST'
The factory default IP address is 192.168.1.255, when using a third-party interface BACNET IP, if amend the MAC mini IP
into other address, you will need to modify the parameters to ensure that in the same network address.
The MAC mini IP is modified to 192.168.0.100 and the 'BACNET_DEVICE_BROADCAST' is modified to 192.168.0.255
Note: After modifying the attribute parameters, the MAC mini has to be rest; only then will it be possible for it to run in
accordance with the new set of properties.
32