Brinkmann 810-6340-S Manual Del Propietário página 33

Bezel
Control Knob
Electrode
Side Burner Igniter Lead
Step 22
Remove two M4 bolts from the side
burner valve. Insert the side burner
valve assembly through the hole in the
side burner front panel, seat the valve
nozzle into the burner venturi. Hold in
place while you perform Step 23.
WARNING: Never use your grill
without leak testing all gas
connections and hoses. See
the section on "Leak Testing"
in this manual for proper
procedures.
Step 23
Place the side burner bezel over the
control knob mounting stem and position
over holes in side burner base and side
burner valve assembly. Attach with two
M4 X 10 mm bolts which come with valve.
Install the side burner knob onto valve
stem. Tighten up the burner assembly /
bracket bolts loosened in Step 21.
Step 24
Attach side burner igniter lead wire to the
electrode as illustrated.
32