Siemens VS06G Serie Instrucciones De Uso página 17

Changing the dust bag
Slide the new dust bag into the holder to the stop.
Caution: The lid can only be closed when a dust
bag has been inserted.
Cleaning the motor protection filter
The motor protection filter should be cleaned at
regular intervals by tapping it or washing it out.
Open the dust compartment cover.
Remove the motor protection filter in the direction of
the arrow.
Empty the motor protection filter by tapping it.
If the motor protection filter is very dirty, wash it out.
Leave the filter to dry for at least 24 hours.
After cleaning, insert the motor protection filter in the
machine and close the dust compartment cover.
32
en Changing the dust bag
Replacing the micro-hygiene filter
The micro-hygiene filter should be changed: when
starting a newpack of bags
Open the dust bag compartment lid.
Release the filter holder by moving the locking lever
in the direction of the arrow.
Remove the micro-hygiene filter. Insert the new
micro-hygiene filter into the vacuum cleaner.
Reinsert the filter holder and clip into place.
Replacing the micro active carbon filter
If your vacuum cleaner is equipped with a micro active
carbon filter, this should be replaced every six months.
Open the dust bag compartment lid.
Release the filter holder by moving the locking lever
in the direction of the arrow.
Remove the micro active carbon filter.
Insert the new micro active carbon filter.
Reinsert the filter holder and clip into place.
en
33