Hd Radio Tm Tuner - Kenwood KDC-X702 Manual De Instrucciones

GETTING STARTED
Register the marine remote ID
Applicable only when you connect Kenwood Marine Remote Control unit
(KCA-RC55MR, optional accessory) to this unit.
• For connection, 42, Connecting external components.
• Refer also to the supplied instruction manual of the Kenwood Marine
Remote Control unit for more information.
Preparation:
Press repeatedly to enter STANDBY, then press the volume knob
to enter [FUNCTION].
1
Turn the volume knob to select an item, then press the knob.
[SYSTEM] [REMOTE SETTING] [REMOTE ID SET]
Remote control ID list is displayed.
• [YES] indicates that this ID is already registered.
• [NO] indicates that this ID is available.
2
Turn the volume knob to select an available ID [REMOTE ID1]/
[REMOTE ID2]/[REMOTE ID3], then press the knob.
"REGISTERING" appears on the display window.
To register, on the Kenwood Marine Remote Control unit:
• Press ENTER to register as [REMOTE ID1].
• Press SRC to register as [REMOTE ID2].
• Press DISP to register as [REMOTE ID3].
Once the ID is registered, "COMPLETED" appears.
To delete the registered ID
1
Turn the volume knob to select an item, then press the knob.
[SYSTEM] [REMOTE SETTING] [REMOTE ID DELETE]
2
Turn the volume knob to select the ID to delete [ID1 DELETE]/
[ID2 DELETE]/[ID3 DELETE], then press the knob.
3
Turn the volume knob to select [YES] to delete the selected ID, and
select [NO] to cancel.
• To exit, press and hold
• To return to the previous setting item, press
6
ENGLISH
(for )
.
.
HD Radio™ tuner
You can tune in to both conventional and HD Radio broadcasts.
• To find HD Radio stations in your area, visit <http://www.hdradio.com>.
Search for a station
1 Press repeatedly to select HD RADIO.
2 Press repeatedly (or press
control) to select FM1/FM2/FM3/AM.
Press S / T (or press S /
3
search for a station or channel.
• To change the searching method for S / T: Press
repeatedly.
AUTO1 : Automatically search for a station or channel.
AUTO2 : Search for a preset station or channel.
MANUAL : Manually search for a station or channel.
• To store a station or channel: Press and hold one of the number
buttons (1 to 6).
• To select a stored station or channel: Press one of the number buttons
(1 to 6) (or press one of the number buttons (1 to 6) on the remote
control).
(for /
/ on the remote
on the remote control) to
)