Kenwood KDC-X702 Manual De Instrucciones página 22

SiriusXM® Radio
Start listening
1 Press repeatedly to select SIRIUS XM.
2 Press repeatedly to select a band.
3 Press .
" " lights up.
4 Turn the volume knob to select a category, then press the knob.
If "ALL CHANNELS" is selected, all the available channels will be
shown.
5 Turn the volume knob to select a channel, then press the knob.
(or)
Press S / T to search for a channel manually.
• Pressing and holding S / T changes the channel rapidly.
If a locked channel or a mature channel is selected, a pass code input
screen appears. Enter the pass code to receive the channel. ( 19)
To change the tuning method for S / T: Press
Each time you press , the tuning method switches between
"CHANNEL" (manually search for a channel) and "PRESET" (searches for a
preset channel of the selected band).
Direct Access Tuning
(using the remote control)
1
Press DIRECT to enter Direct Access Tuning.
2
Press the number buttons to enter a channel number.
3
Press to start searching.
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step
is automatically canceled.
18
ENGLISH
SiriusXM Keymode
Press and hold
(Default: Channel keymode)
"
When channel keymode is selected...
To
Select a channel
Change a channel
rapidly
Store a channel of
the current band
Select a stored
channel of the
.
current band
When replay keymode is selected...
To
Playback/pause
Skip backward/
forward
Rewind/Fast-forward
2 , Direct Access Tuning
Go to Live
to change the keymode (channel or replay).
" lights up when replay keymode is selected.
On the faceplate
Press S / T.
Press and hold
S / T.
Press and hold
one of the number
buttons (1 to 6).
Press one of the number buttons (1 to 6).
On the faceplate
Press
Press S / T.
Press and hold
S / T.
Press 1.
On the remote control
Press S /
Press and hold S /
.
( Not available )
On the remote control
. Press .
Press S /
Press and hold S /
.
.
.