EHEIM PowerLine XL Guia De Inicio Rapido página 8

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
English
Safety instructions
For indoor use only. For use with aquariums.
All electrical equipment in the water must be disconnected from the mains
during care and maintenance work. It is imperative to disconnect the filter
from the mains prior to opening it.
The connecting line of this device can not be replaced. When the line is da-
maged, the device must no longer be used.
Contact your specialised dealer or your EHEIM Service Centre.
This equipment is not intended for use by persons (including children) with
limited physical, sensory or mental abilities or for persons with no experi-
ence or knowledge unless they are supervised by a person responsible for
safety or unless they have received from such a person instructions on how
to use the equipment. Children should be supervised to ensure that they do
not play with the equipment.
20 cm
also refers to pacemakers. Please consult the manuals of medical equip-
ment for the required safety margins.
Attention: Maintenance work presents the risk of crush-
ing the fingers due to high magnetic forces.
For your own safety, we recommend to form a drip loop
with the connection cable to prevent any water running
along the cable from intruding into the socket.
When using a multiple socket or an external power
supply unit, position them atop the filter's power connection.
Take the necessary precautions when handling components that can dis-
charge static electricity.
Do not clean the unit – or parts of it – in the dishwater. Not dishwater resi-
stant!
Do not dispose of this product as normal household waste. Take it to your
local refuse collection side.
The product is qualified in accordance with the respective national regula-
tions and guidelines and meets EC standards.
Function
a Pump b Filter module with cartridge c Discharge connection
A
d Diffusor e Air regulating valve f Mounting supports g Filter
bottom h Closing slide i Fixing strip (see diagram C).
Installation
The screw clamps j of the mounting supports are available in two
B
versions which can be inserted in position. The vertical position of the
filter can be adjusted with the set screw k .
C
By moving the two fastening strips of the pump, the filter can be in-
stalled in any required direction of discharge.
Notice: These devices produce magnetic fields which might
cause electronic and mechanical disturbances or damages. This
Power Pack filter 2252
Model: see type plate on pump housing

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

2252020

Tabla de contenido