Uline H-1495 Manual De Instrucciones página 3

3. Place handle (G) on top of back panel (K) so that
the screw holes on handle tabs line up with holes on
back panel (K). Install screws. (See Figure 3)
4. Insert tongues on one end of top shelf (H) into slots on
back panel as shown. Install 2 screws on each side as
shown. (See Figure 4)
Figure 4
PAGE 3 OF 24
ASSEMBLY CONTINUED
Figure 3
5. Install additional four screws through four tab holes
which are near the four screws just attached.
(See Figure 5)
Figure 5
G
0721 IH-1495