Uline H-1495 Manual De Instrucciones página 4

6. Stand cart up.
7. Place the two top gates (D) onto the top shelf (H) so
that gate is in upright position and smooth side of
gate faces interior of cart. When placed correctly,
the hook on the cart handle fits through the hole in
gate; the gate rests on the support molded into the
top shelf. (See Figure 6)
8. Repeat this process for two bottom gates (E). Leave
all gates in the upright position for the rest of the
assembly process. (See Figure 6)
9. Attach front gate (F) to front panel (J) by sliding 2
hinges on front panel into front gate as shown. Leave
front gate in down position, with the smooth side up,
and resting on top of the front panel. (See Figure 7)
PAGE 4 OF 24
ASSEMBLY CONTINUED
Figure 7
Figure 6
0721 IH-1495