16. Beginning with the bottom rail, slowly move front
panel (J) back into position, making sure each rail
secures properly into slots on both panels.
17. If a rail falls out of position, simply place it back into
its slot and continue.
18. When all 9 rails are properly positioned, attach front
panel (J) back to top shelf (H). Secure with 4 screws.
Rail kit installation is complete and your Mobile
Workstation is ready to use. (See Figure 12)
Figure 12
• Exceeding recommended weight limit may result in instability causing serious injury.
• Maximum weight capacity per shelf is 200 lb. (90 Kg).
• Caution when moving cart on incline or rough surface.
• Cart can tip over if weight is not evenly distributed.
Maximum capacity:
200 lb. (90 kg.) per shelf
400 lb. (180 kg.) total
PAGE 7 OF 24
ASSEMBLY CONTINUED
See chart on next page
for information on bin configurations.
CAUTION!
* You may need to alternately pull the front panel away from
and push it towards the back panel to hold each successive rail
in place.
Top Shelf
27.75 × 17"
Bottom Shelf
30 × 17"
0721 IH-1495