Uline H-1495 Manual De Instrucciones página 5

10. Attach front panel (J) to bottom shelf (I) by sliding
shelf tongues into slots on front panel (J). Be sure to
place top and bottom gate tabs into holes on front
panel. Attach fixed casters (C) to bottom tabs of front
panel and up into bottom shelf (I). (See Figure 8)
NOTE: Mobile Workstation may be assembled
with or without storage bins
a. If using WITHOUT storage bins, proceed to Step 11.
b. If using WITH storage bins, proceed directly to
Step 12.
11. ONLY IF NOT USING BINS: Secure top shelf (H) to front
panel (J) from underneath with 4 screws. (See Figure 9)
Figure 9
PAGE 5 OF 24
ASSEMBLY CONTINUED
Figure 8
Assembled without bin configuration
0721 IH-1495