Uline H-1495 Manual De Instrucciones página 6

12. Pull the top of front panel (J) no more than 2 inches
away from top shelf (H). (See Figure 10)
13. Install first rail (L) by placing one end in the bottom
slot of inside back panel (K) as shown. Make certain
the rail is positioned open-side up. (See Figure 11)
14. Push the front panel back towards the top shelf just
enough so that the rail is held in place in between
the front and back panels.
NOTE: Make certain rail is held in slots on both
sides before proceeding.
15. Install remaining 8 rails in this same manner.
PAGE 6 OF 24
ASSEMBLY CONTINUED
Figure 10
Figure 11
0721 IH-1495