After-Sales Service - nardi NFR52NTX Manual Del Operador

After-sales service

In the event of the refrigerator not working properly, please check and solve the problems in line with the
following methods. If the problem persists, contact the after-sales service centre. Information concerning the
model, the accessory list and the serial number of the refrigerator is required.
Please determine the cause of the problem before attempting any repairs.
The refrigerator does not operate.
The power supply is
disconnected (plug, socket or fuse).
Lamp does not illuminate
The bulb is fused. The power supply is not
connected
The set temperature is not reached.
The door is not properly
closed, or the door has been
opened for a prolonged period.
All manuals and user guides at all-guides.com
Voltage is low.
The refrigerator is in direct
sunlight, or dose to a heat
source.
Automatic defrosting is activated. (Compressor
ceases operation for 25 minutes)
Excessive noise
Contact between the
refrigerator and a wall or
other article.
The area is poorly ventilated, or
the two sides of the refrigerator
are covered by too much dust.
Uneven placement