Connecting Interface Cables - Citizen CT-E351 Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

3.2 Connecting Interface Cables

1.
Turn off the power.
2.
Orient the interface cable correctly and insert it into the interface connector.
USB + serial
CAUTION
 When disconnecting the cable, always hold the connector.
 Be careful not to insert the USB cable into the cash drawer kick-out connector.
 To connect more than one printer to a single computer by USB, you must change the serial
number of the USB interface.
 Hold the connector of the LAN cable perpendicular and straight when connecting or discon-
necting it. Doing it at an angle may cause the connector to misconnect.
Use a serial cable with the connection layout shown below.
CAUTION
Place the interface cable so that people do not trip on it.
Ethernet + USB
9-pin (female) - 9-pin (female) cable
P
C
Signal
Pin
RXD 2
TXD
3
DTR
4
SG
5
DSR 6
RTS
7
CTS
8
23
P
i r
t n
r e
Pin
Signal
2
RXD
3
TXD
4
DTR
5
SG
6
DSR
7
RTS
8
CTS

Publicidad

Tabla de contenido
loading

Tabla de contenido