Usb Interface; Connecting The Interface Cable - Citizen CT-E601 Manual De Usuario

3.3 USB Interface

Data can be exchanged by USB communication.
Specifications
Standard
Communication speed

Connecting the Interface Cable

1. Turn off the power.
2. Confirm the orientation of the interface cable and connect it to the port.
3. Insert the other connector firmly into the interface port of the host computer.
n When disconnecting the cable, always hold the connector.
n Place the interface cable so that people do not trip on it.
n Be careful not to insert the USB cable into the cash drawer kick-out connector.
Notes
n Do not connect multiple interfaces at the same time.
n To connect more than one printer to a single computer by USB, you must change the serial
number of the USB interface.
n There are models with a USB port on the interface board side.
With such a model, do not connect USB cables to both the printer main unit side and inter-
face board side.
If USB cables are connected to both, priority will be given to communication of the one con-
nected to the port on the main unit side.
USB 2.0 specification-compliant
Supports 12 Mbps (Full-Speed) transfer
CAUTION
– 35 –