Philips HTS6520/55 Manual Del Usuario página 41

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

[TV Display]
Selects one of the following display formats:
4:3 Pan Scan (PS)
4:3 Letter Box (LB)
[4:3 Pan Scan] – For 4:3 screen TV: full-
height display with the trimmed sides.
[4:3 Letter Box] – For 4:3 screen TV:
wide-screen display with black bars on
the top and bottom of the screen.
[16:9 Wide Screen] – For wide-screen
TV: display ratio 16:9.
[Picture Setting]
Selects a predefi ned set of picture color
settings or customize the personal setting.
[Standard] – Original color setting.
[Bright] – Vibrant color setting.
[Soft] – Warm color setting.
[Personal] – Customizes the color setting.
Set the level of brightness, contrast,
sharpness/tint and color saturation, then
press OK .
[HDMI Setup]
Selects the HDMI video setting when you
connect this Home Theater System and the
TV with a HDMI cable.
[Wide Screen Format] – Defi nes wide
screen format for disc play.
Option
Description
[Superwide] Center position of the screen
is stretched less than the side.
Applicable only to 720p and
above video resolution setting.
[4:3 Pillar
No stretching of picture. Black
Box]
bars are displayed on both
sides of the screen.
[Off]
Picture is displayed according to
the disc format.
16:9 (Wide Screen)
Option
[Auto]
[480i] , [480p] ,
[576i] , [576p] ,
[720p] , [1080i] ,
[1080p]
[Closed Caption]
Turns off or on display captions.
[Progressive]
If the TV supports progressive scan output,
you can turn on the progressive scan mode to
enhance the picture quality. Video connection
through Component Video is required.
Note
This setting is only available if you have set the
[TV Display] setting to [16:9 Wide Screen] .
[HDMI Video] – Selects the HDMI video
output resolution that is compatible with
your TV display capability.
Description
Detects and selects the best
supported video resolution
automatically.
Selects a video resolution
that is best supported by the
TV. See the TV manual for
details.
Note
If the setting is not compatible with your TV, a
blank screen appears. Wait for 15 seconds for
auto recover or press HDMI repeatedly until
the picture appears.
[On] – Shows the sound effects in
subtitles. Applicable only to discs with
Closed Caption information included and
the TV supports this feature.
[Off] – Disables closed caption.
[On] – Turns on progressive scan mode.
[Off] – Disables progressive scan mode.
Tip
There is more detailed description available
(see 'Get started' > 'Turn on Progressive
Scan').
EN
41

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido