Starrett W2900 Manual Del Usuario página 11

8. Press the LIMITS button. The MAX LIMIT icon will appear in the
top middle of the display, see Fig.7.
9. Press the SHIFT/SET button. The LIMIT icon will flash on/off.
10. Adjust the gauge using a reference surface to the desired
maximum value.
11. Press the SHIFT/SET button to capture the maximum value. The
LIMIT icon will stop flashing.
12. Press the LIMITS button to use the go/no go function. The display
will flash unless the reading is within the range that you set your
limits to. The SET icon will remain on. The MAX and MIN icons
will stay off as long as the reading is within the set limits. If the
measurement is beyond the set limits, the display will flash and
the MIN or MAX LIMIT icon will indicate the direction the limit has
been exceeded. To exit Press the LIMITS button.
FUNCTIONS
PKG08863-UMW2900 11