Setting The Limits (Go/No Go Function) - Starrett W2900 Manual Del Usuario

FUNCTIONS

2.1 Setting the Limits (Go/No Go Function)

1. This function is only available with the advanced type indicators.
2. Select the units to be displayed.
3. Press the SHIFT/SET button. The SET icon will appear in the upper
left corner Fig.6A.
4. Press the LIMITS button. The MIN LIMIT icon (MIN LIM) will appear
in the upper middle of the display Fig.6B.
5. Press the SHIFT/SET button. The LIMIT icon will flash on/off.
6. Adjust the gauge using a reference surface to the desired
minimum value.
7. Press the SHIFT/SET button to capture the minimum value. The
LIMIT icon will stop flashing. Continued on next page...
10 PKG08863-UMW2900