Master & Dynamic MW07 PLUS Manual Del Usuario

MW07 PLUS QUICKSTART
The first time you take both earphones out of their case they
will enter pairing mode.
PAIRING
STEP 1: Open the Bluetooth menu on your device.
STEP 2: Select M&D MW07 PLUS R.
STEP 3: When prompted by your device, confirm connection.
MULTI-FUNCTION
BUTTON
PULSING
INDICATOR
LIGHT
To manually activate pairing mode, hold down the multi-function button until
the indicator light starts pulsing/pairing tone is heard. NOTE: if you are
already connected to a device, remove the earphones from your ears to avoid
activating your voice assistant.
Dual microphones in each earphone provide the freedom to listen or talk with
just one earphone.
Your earphones come with medium fit wings and medium ear tips
attached. For the most secure fit and best acoustics, choose the
FIT
ear tips that form a seal with your ear canal, and the fit wings that
comfortably fit under your ear ridge. To remove or attach the fit
wings you must first remove the ear tips.
EAR TIP OPTIONS
XS S M L
FIT WING OPTIONS
NONE S
XL
M L
CONTROLS
MULTI-FUNCTION
BUTTON
To insert your earphones follow these steps:
Tilt the earphone forward
with the ear tip resting
lightly in your ear canal.
For more information visit masterdynamic.com/support
1X: PAUSE / PLAY
2X: SKIP FORWARD
3: SKIP BACK
VOL+
VOICE ASSISTANT
VOL-
HOLD MULTI-FUNCTION
BUTTON TO ACTIVATE
AMBIENT LISTENING MODE
HOLD VOL+ FOR ON/OFF
ACTIVE NOISE-CANCELLING
HOLD VOL- FOR ON/OFF
CASE BATTERY
Case and earphones
recharge to 50% in 15 min,
100% in 40 minutes
EARPHONE BATTERY
Rotate the earphone down until
the ear tip forms a seal with
your ear canal and the fit wing
slips under your ear ridge.
Full
Med
Low
EAR
RIDGE