Using The Toshiba Video Dock Utility - Toshiba dynadock V Manual Del Usuario

Selecting message options
A warning message displays on your computer screen if you
disconnect your computer from the dynadock™ without first
undocking it. To avoid data loss or equipment damage, it is
important to undock to stop all communications with connected
peripherals before you disconnect your computer from the
dynadock™. TOSHIBA recommends that you do not turn off this
warning message.
A message will also display to notify you when undocking is
complete and it is safe to disconnect your computer from the
dynadock™.
To turn messages ON or OFF:
1 Click the TOSHIBA dynadock Utility icon in your Windows
system tray/notification area.
(Sample Image) TOSHIBA dynadock™ V Utility icon
2 Click Settings.
3 Select the checkboxes next to Show undocking complete
message and Show unexpected remove message to turn these
messages ON, or de-select the checkboxes to turn them OFF.
4 Click OK.

Using the TOSHIBA Video Dock Utility

Use the TOSHIBA Video Dock Utility to adjust the settings for the
monitor connected to the dynadock™. With this utility, you can
select Mirror mode or Extended mode, and select screen resolution,
color quality, and refresh rates.
To access the Video Dock Utility:
❖
Right-click the TOSHIBA Video Dock icon in the system
tray/notification area of your Windows
(Sample Image) TOSHIBA Video Dock icon
Using the dynadock™ and Adjusting Settings
Using the dynadock™ V software
®
desktop.
29
®