Toshiba dynadock V Manual Del Usuario página 36

36
Using the dynadock™ and Adjusting Settings
Adjusting audio settings
3 On the Playback tab of the dialog box, select one of the
following:
❖
❖
4 Click Set Default.
5 Click OK.
6 Connect your audio playback device to the jack you enabled in
step 3.
NOTE
Configuring audio recording ports (Microphone)
1 Click the TOSHIBA dynadock Utility icon in the system tray/
notification area of your Windows
(Sample Image) TOSHIBA dynadock™ V Utility icon
NOTE
2 Select Select Sound Device... from the menu.
3 On the Recording tab of the dialog box, select one of the
following:
❖
❖
4 Click Set Default.
5 Click OK.
6 Connect your microphone to the jack you enabled in step 3.
To use the dynadock's Headphone/Speakers/Line out jack,
select USB Multi-Channel Audio Device.
To use the docked computer's Headphone/Speakers/Line
out jack, select a different playback device (other than
USB Multi-Channel Audio Device).
You may need to restart your media player for the audio changes to
take effect.
If the icon is not visible in your system tray/notification area, make
sure the dynadock™ is connected and docked, and then click the
Show Hidden Icons button [
icons.
To use the dynadock's Microphone jack, select USB
Multi-Channel Audio Device.
To use the docked computer's Microphone jack, select a
different recording device (other than USB Multi-Channel
Audio Device).
®
desktop.
], if necessary, to display hidden