Connect The Dynadock™ To Your Computer - Toshiba dynadock V Manual Del Usuario

Setting Up the dynadock™ and Connecting Peripherals
The following programs are installed during the installation
process:
Driver Type
Network driver
Audio driver
Video driver
After you install the software and dock your computer, the icons
below appear in the system tray/notification area of your desktop.
Driver
dynadock™ V
Utility
DisplayLink™
4 Follow the on-screen instructions to finish the installation.
NOTE
5 Restart your computer when prompted.
For more information on the dynadock™ V software, see
the dynadock™ V software" on page
Connect the dynadock™ to your computer
1 Connect the square end of the provided USB cable into the
USB type B connector on the back of the dynadock™.
2 Connect the other end of the USB cable to an available USB
port on your computer.
Windows
device drivers.
3 Restart your computer when prompted.
You will need to read and accept the DisplayLink™ software license
agreement when prompted, to proceed with the installation.
®
automatically detects the device and installs the
Setting up the dynadock™
Driver Name
ASIX AX88772A
USB Multimedia Audio Device
TOSHIBA dynadock video
(DisplayLink™ Corp. software)
Description
USB and audio control
Video control
27.
21
"Using