Playxchange; Scanning Discs - Yamaha CDC-697 Manual De Instrucciones

Ocultar thumbs Ver también para CDC-697:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BASIC OPERATION
Select a desired disc play mode (1DISC or
3
5DISCS) confirming it on the display.
MODE
"1DISC" mode: The unit will play back a
"5DISCS" mode: The unit will play back all discs on
Start playback from the first track of the disc 1.
4
* If necessary, select a desired disc by using the
DISC SKIP buttons, or a DISC-select button on the
front panel.
DISC SKIP
On the remote control
transmitter
■ To stop playback temporarily
On the remote control
transmitter
To resume playback, press the d button again (or press the
w button).
* The w/d button on the front panel can also be used to
stop playback temporarily or to resume playback.
■ To stop playback completely
On the remote control
transmitter
10
En
1DISC
REP RN
5DISCS
S F P
SEARCH
TITLE
ARTIST
Shows the selected disc mode.
designated disc only.
the tray in sequence.
DISC
2
3
or
On the front panel
Playback will automatically
start.
or
On the front panel
or
On the front panel

PLAYXCHANGE

During playback, you can open the disc tray by pressing the
PLAYXCHANGE button on the front panel without
interrupting disc playback. However, in this case, pressing
the DISC SKIP buttons has no effect. You can load or
replace discs on the trays when the disc tray is opening,
however, never load a disc on the tray hidden inside the unit.
If doing so, the disc and the unit may be damaged, because
the tray already has a disc, which is being played back.

Scanning Discs

4
■ This mode is convenient to search
for a desired disc (or to check discs
on the disc tray)
When the DISC SCAN button is pressed in stop mode, this
unit will play back a section of each disc in turn for 8
seconds.
If, during this playback, you find a disc that you want to
listen to, press the DISC SCAN button once again or press
the w button to cancel this function. The unit will enter into
the normal playback mode.
Notes
• During this playback, the disc tray numbers blink in the
display. Every time the playback of a disc is finished, the
corresponding tray number is changed from flashing to
lighting.
• If the disc being played back has a long blank space between
tracks, you will hear no sound during disc scan.
DISC SCAN

Publicidad

Tabla de contenido
loading

Tabla de contenido