Starrett W733.1 Manual Del Usuario página 7

Button Placement and Functions
The functions printed in yellow; LIMITS and PRESET, are used in conjunction with
the SHIFT/SET button also printed in yellow. To enable these functions press the
SHIFT/SET button first. The SET (S) icon will appear in the top left corner of the
display, and then press the button for the required function. To Power on the tool
move the spindle or press any button. The tool will turn off automatically.
Wireless
1
Button
USB Mini
2
B Port
3 SHIFT/SET
4 PRESET
5 ZERO
6 ABS
7 IN/mm
8 LIMITS
9 Hold
10 Send
Turns on the Wireless module allowing communication
with other Wireless devices.
This is the USB port to charge the tool's battery.
Dual function button used to enable the, Preset and the
Limits function. When enabled the SET (S) icon will be
displayed on the top left corner of the display.
Press the SHIFT/SET button and then press the PRESET
button to enable the PRESET function.
Press and release the ZERO button and the display will
zero. The spindle must not be moved until the Zero
Sequence has elapsed.
Press and hold the button for 2 seconds enables ABS
mode. Press and hold for 2 more seconds to exit the
ABS mode.
Toggles the display between English or Metric units.
Press the SHIFT/SET button then press the LIMITS button
to enable the function.
Press and hold the button for a second will freeze the
display and the word "HOLD" will appear. A second press
and the display will update to the current position reading.
A quick press and release of the button will send a reading
from the tool when the wireless is enabled.
GENERAL INFORMATION
PKG08861-UM733.1 7