Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TOPCOM MULTITALKER 1000
13
CLOCK FUNCTIONS
When the battery is installed and the unit is OFF, the time is displayed.
13.1 SETTING THE TIME
In power OFF mode:
•
Press and hold
MENU
•
Press
or
to change the hour.
•
Press
to confirm, the minutes flashes.
MENU
•
Press
or
to change the minutes.
•
Press and hold
MENU
13.2 STOPWATCH
•
Press and hold
CALL
•
Press
to start counting
•
Press
to stop counting
•
Press
to reset the timer
•
Press and hold
for 3 seconds to exit stopwatch mode
CALL
14
USING THE MULTITALKER
14.1 TURNING THE UNIT ON/OFF
•
To activate; press and hold
•
To switch off; press and hold
14.2 ADJUSTING SPEAKER VOLUME
The Speaker Volume can be adjusted using
the LCD.
14.3 RECEIVING A SIGNAL
The unit is continuously in the RECEIVE mode when the unit is ON and not transmitting. When you
receive a signal on the current channel, the RX icon is displayed.
8
for 3 seconds, the hour flashes.
for 3 seconds to confirm the setting
The time will be reset to 12:00 when the battery is removed.
for 3 seconds to enter stopwatch mode
. The unit will "beep" and the LCD Screen will display the current channel.
again. The unit will "beep" and the LCD Screen will turn blank.
In order for other people to receive your transmission, they must be set
on the same channel and CTCSS code
and
. The Speaker Volume level is displayed on
TOPCOM MULTITALKER 1000
Publicidad
Tabla de contenido
