Optional Accessories; Protecting The Environment - DeWalt DC411 Manual Del Usuario

All manuals and user guides at all-guides.com
ENGLISH
CHARGER CLEANING INSTRUCTIONS
WARNING: Shock hazard. Disconnect
the charger from the AC outlet before
cleaning. Dirt and grease may be
removed from the exterior of the charger
using a cloth or soft non-metallic brush.
Do not use water or any cleaning
solutions.

Optional Accessories

WARNING: Since accessories, other
than those offered by D
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D WALT, recommended
E
accessories should be used with this
product.
WARNING: Accessories must be rated
for at least the speed recom mended on
the tool warning label. Wheels and other
accessories running over their rated
accessory speed may fly apart and
cause injury. Threaded accessories
must have a M14 hub. Every
unthreaded accessory must have a
22.2 mm (7/8") arbor hole. If it does not,
it may have been designed for a circular
saw. Accessory ratings must always
be above tool speed as shown on tool
nameplate.
It is important to choose the correct guards, backing
pads and flanges to use with grinder accessories.
Consult your dealer for further information on the
appropriate accessories.
ACCESSORY TABLE
Max. Min.
[mm]
Rotation
[mm]
-1
[min.
D b d
d
125 6 22.23 11000
D
b
D
125 - - 11000
64
d
b
D
D
WALT, have
E

Protecting the Environment

Should you find one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
D WALT provides a facility for the collection and
E
recycling of D
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
Periphical Threaded
on our behalf.
speed hole length
] [m/s] [mm]
You can check the location of your nearest
authorised repair agent by contacting your local
D WALT office at the address indicated in this
E
manual. Alternatively, a list of authorised D
80 -
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.
80 -
Max. Min. Periphical
[mm]
Rotation speed
[mm]
-1
[min. ] [m/s]
D b d
75 30 M14 11000 45
125 12 M14 11000 80
Separate collection. This product must
not be disposed of with normal
household waste.
WALT product
E
Separate collection of used products and
packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
WALT products once they have
E
WALT
E
Threaded
hole length
[mm]
18.0
18.0