Driving In Fasteners - Prebena 1GP-ALK35 Manual Original

Driving in fasteners


Make sure that you and any other persons in the danger
area wear suitable safety goggles and suitable protective
clothing during operation.

Observe the valid health and safety regulations.
 Make sure that you and any other persons in the danger
area wear suitable ear protection.
 Observe the valid noise protection regulations.
 Select the lowest possible operating pressure.
 Only use the tacker for wooden objects.
 Ensure that the driving depth is not set deeper than the
thickness of the piece of wood.
 When triggering, press the tacker firmly against the wood
 Do not position the tacker at an angle < 30° to the fixing
level.
When fasteners are driven into workpieces that are too hard, or into
other fasteners, a powerful kickback is generated. This can cause
the tacker to slip off.
WARNING
Risk of injury due to electric shock.
 Before triggering the tacker, ensure that no
power cables can be struck.
WARNING
During operation, injuries to the eyes and other
body parts are possible due to flying splinters.
WARNING
Loud operating noises can cause damage to
hearing.
WARNING
Risk of injury when nails slide off or are driven in
too deep, or due to kickback.
Operating the tacker
21