Safety
Avoiding the risk of fatal injuries
During the triggering sequence and whenever the tacker is
connected to the air supply, ensure that no body parts are near
the opening.
Ensure that the fasteners are not driven into power cables.
Never direct the tacker at people, animals or their body parts.
Only trigger the tacker when the tool lug is pressed onto the
workpiece.
Disconnect the tacker from the compressed air supply before
handing it over to other persons.
Do not allow children to play with packaging films – these pose a
risk of suffocation.
Preventing the risk of explosion
Do not use the tacker in potentially explosive areas.
Never operate the tacker with oxygen or other explosive gases or
gas mixtures.
Only operate the tacker on suitable compressed air systems (see
page 14).
Only use the tacker if it is in perfect working order (see page 13).
8