Tabla de contenido
Publicidad
4.
Install wall plate assembly
NOTE: If needed, you can make small level adjustments to the wall plate by loosening the bottom lag bolt and shifting the wall plate
until level. Tighten the bottom lag bolt when adjustments are complete.
CAUTION:
Avoid potential personal injury or property damage! All lag bolts MUST BE firmly tightened to prevent
unwanted movement of the wall plate
next step.
Go to STEP 3 on PAGE 14.
4
using two lag bolts
15
16
. Ensure the wall plate is securely fastened to the wall before continuing on to the
15
16
. Tighten the lag bolts only until they are pulled firmly against the wall plate.
15
15
16
11
Publicidad
Tabla de contenido
