Tool Fitness Homeform20 Manual De Instrucciones página 18

to centre itself. If during use, the belt continues to move toward one side, adjustments are necessary. The procedures
are as below:
� First set speed at lowest position.
� Second check the belt shifts to which side.
If the belt shifts to right, tighten the right bolt and loosen the left bolt by using 6mm Hexagonal Wrench, until the belt
is centered itself; If belt shifts to left, tighten the left bolt and loosen the right bolt by using 6mm Hexagonal Wrench,
until the belt is centered. When adjusting the belt using the 6 mm Hexagonal Wrenches, it is important to adjust the
belt in half turn increments. Over adjusting the belt can cause damage to the mat.
17