LUND Cargo-Logic System Instrucciones De Instalación

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Service at
Important Safety Information
To avoid risk of personal injury or property damage:
Do not use Cargo-Logic system as a safety restraint for large, heavy or unsafe objects.
Large, heavy or unsafe objects may be thrown about your vehicle during heavy braking or during an accident.
Do not use the Cargo-Logic system to stack objects higher than vehicle seatbacks.
Contents
Male Block
Installation Steps
Align the a male block with a female so the
Velcro faces down. Align the fingers
R
1
with the corresponding recesses.
Care and Cleaning
1. For normal cleaning simply vacuum with a non-motorized attachment.
2. For heavy cleaning wash with mild soap. Hose off and air dry.
Note: Do not use high pressure sprayers. Do not use heat guns or heated driers.
Congratulations
You have purchased one of the many Lund branded products offered by Lund International, Inc. We take the utmost pride in our products and
want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in terms of fit,
durability and ease of installation.
™
Installation Instructions
Cargo-Logic System
CAUTION
Female Block
Place the parts on a firm surface and
2
press until they snap together.
TM
Lund International
800-241-7219 • Visit us at lundinternational.com
© 2012 Lund International, Inc. All rights reserved.
Lund , the Lund logo , and Cargo-logic are trademarks of Lund International Inc.
® ®
TM
Install the cargo liner by positioning it in the cargo
area or trunk. See above illustration for
3 examples of how to use the Cargo-Logic
system.
™
I-105
Rev.4
1-800-241-7219.
Cargo Mat