Resistance Measurements - Keysight U1271A Guia De Inicio Rapido

All manuals and user guides at all-guides.com
U1271A/U1272A Handheld Digital Multimeter
Performing Measurements and Tests

Resistance measurements

Set up your multimeter as shown in the figure below to per-
form resistance measurements.
Smart
Smart Ω measurements (U1272A only):
• Use the Smart Ω function to measure resistors affected by
DC offset or leakage current.
• If DC offset or bias voltages are detected on the resis-
tor-under-measure, the offset or bias DC voltage value will
be shown on the secondary display. If the DC voltage on the
resistor is over +1.25 V,
play.
10
While performing resistance mea-
surements, press
is shown on the display to enable the
Smart Ω function.
is shown on the secondary dis-
U1271A/U1272A Quick Start Guide
until