Install The Batteries - Keysight U1271A Guia De Inicio Rapido

All manuals and user guides at all-guides.com
U1271A/U1272A Handheld Digital Multimeter
Differences between the U1271A and U1272A
Differences between the U1271A and U1272A
The U1272A model offers these additional functions:
• Z (low input impedance) measurements
LOW
• Smart Ω measurements
• Auto-diode tests
• AC+DC voltage and current measurements
• J-type thermocouple temperature measurements
• 30 Ω and 300 MΩ ranges for resistance measurements
• dBm and dBV measurements with selectable impedance
• Data logging up to 10,000 memories
The U1271A model has one differing function:
• Qik-V tests

Install the Batteries

Your multimeter is powered by four 1.5 V AAA alkaline batter-
ies (included with the shipment).
1 Turn the rotary switch to OFF and remove
the test leads from the terminals.
2 Lift the tilt stand and loosen the screws
with a suitable Phillips screwdriver.
3 Remove the battery cover and observe the
polarity markings.
4 Insert the batteries and replace the battery cover and screws.
Turn On the Multimeter
To power ON your multimeter, turn the rotary switch to any
other position.
Your multimeter is capable of remote data logging. To use this
NO TE
feature, you will need an IR-USB cable (U1173A, purchased
separately) and the Keysight GUI Data Logger Software (down-
loadable from www.keysight.com/find/hhTechLib).
2 U1271A/U1272A Quick Start Guide