ContentsOfTheBox; HowToSetUpTheNunaTavo; HowToUseTheNunaTavo - Nuna tavo Manual De Instrucciones

ContentsoftheBox

Stroller Frame
Front Wheel
Rear Wheel
Armbar
Brake assembly
No tools required for assembly
HowtoSetUpthe
NunaTAVO
OpeningtheNunaTAVO
Check that you have all the parts for this product before using it.
The assembly should be performed only by adults.
1 Separate storage latch from storage mount
(2),
upwards a click sound means the stroller is open completely.
2 Check that the stroller is completely latched open before continuing.
AssembleFrontWheels
1 Assemble front wheels to front legs.
Check that wheels are securely attached by pulling down.
2 To disassemble front wheel, detach front wheel from front leg
while pushing the release button.
AssembleRearWheels
1 Assemble brake assembly
is on top. (5)
13
All manuals and user guides at all-guides.com
(1),
and then lift the handle
(3)
(4)-1
(5) to rear legs. Make sure that the brake lever
2 Assemble rear wheels to brake assembly. A click sound means they are
locked. (6)
Check that wheels are securely attached by pulling on wheel assemblies.
3 Wrap the rear leg connecting tube with the fabric flap from the storage
basket and connect the three snaps.
4 To disassemble rear wheel, detach rear wheel from rear wheel mount
(8)-2
while pressing the release button
AssembleArmbar
1 Align the armbar ends with the armbar mounts, and then slide down to lock.
Check that armbar is securely attached by pulling on each end.
2 To disassemble armbar, press armbar release buttons
pull out the armbar.
3 The completely assembled stroller is shown as

HowtoUsetheNunaTAVO

Securingchild
1 To release the buckle latch, push on center button and remove the clips.
2 To secure child, assemble buckle and latch.
3 Fit harness snugly to child by sliding each adjustment buckle.
(4)-2
Adjustingtheshoulderharnessposition
1 To adjust the position of the shoulder harness anchor, open the zipper of
seat back, turn the anchor to align with slot. Thread it through the shoulder
harness slot from back to front
closest to child's shoulder height

(7)
(8)-1
.
(10)-1
(10)-2
.
(11)
(13,14,15)
(17) . Rethread it through the slot that is
(18)
(9)
, and then
(12)
(16)
14