Velleman HAA9523S Manual Del Usuario página 11

3. Operating the keypad – Taking the data programmed above and other default features as reference
a. To command an output, only enter the user code. Pressing
b. The personal master code is a super user code to command the outputs. This feature allows you to use
only one code to operate several keypads with the same master code but different user codes. Enter
the personal master code and validate with
c. The duress code does not need to be programmed. The keypad automatically determines the duress
code by increasing the first digit of user code 1 with two units.
Example: If user code 1 is 1234, then the duress code will be 3234. If user code 1 is 8321, then the
To command the duress function, enter the duress code.
NOTE: The duress code has 2 functions: it activates the duress output and at the same time it activates
output 1 as user code 1. The duress code can always activate or deactivate (in start / stop mode)
output 1, but cannot deactivate (reset) the duress output.
d. The accelerated code is the first two digits of the user code. If output 1 has been programmed in start /
stop mode with accelerated code at location 42, it will be possible to activate output 1 with only the first
two digits of the user code. Deactivation always requires the composition of the complete user code.
Example: Output 1 has been reprogrammed to start / stop mode with accelerated code (location 42).
e. Try and enter some random false codes to test the safety. The HAA9523S will consider 4 digits as one
code and generate 5 beeps for each unsuccessful code entry. The keypad will lock itself during 15
minutes after 10 successive false codes. The keypad can be reset during the locking period by entering
the master code.
HAA9523S
duress code will be 0321.
Complete code: 8321, accelerated code: 83.
Output 1 activates for 1 second
Output 2 starts or stops
Output 3 starts or stops
and the corresponding output number.
Output 1 activates for 1 second
Output 2 starts or stops
Output 3 starts or stops
Duress output activates (output switches to (-) ground) and
output 1 activates for 1 second
Output 1 starts
Output 2 stops
Locking is reset and keypad resumes normal operation
11
is not required.
VELLEMAN