Velleman HAA9523S Manual Del Usuario página 12

C) Multi-user mode operation – Example
1. Requirements
a. Multi-user mode
b. Change the factory-set master code 0000 to a personal master code 3289
c. Set 1 user code in group 1 to 8321
st
d. Set 2 user code in group 1 to 11223
nd
e. Set 3 user code in group 1 to 33221
rd
f. Set 1 user code in group 2 to 6854
st
g. Set 2 user code in group 2 to 54321
nd
h. Set 1 user code in group 3 to 9270
st
i. Set output 1 to momentary mode, 1 second
j. Set output 2 to start / stop mode
k. Set output 3 to start / stop mode
l. Set the keypad to lock itself during 15 minutes after 10 successive false codes
2. Programming – Setting the above requirements into the keypad
NOTE: * Entering single user command code 8901 is not necessary if the keypad was already in single
user mode.
Cancel a wrong entry with
HAA9523S
Program mode with factory-set master code
Multi-user mode*
3289 stored as new personal master code and
super user code
8321 stored as 1
duress code function
11223 stored as the 2
duress code function
33221 stored as the 3
duress code function
6854 stored as the 1
54321 stored as the 2
9270 stored as the 1
Output 1 set to momentary mode, 1 second
Output 2 set to start / stop mode
Output 3 set to start / stop mode
Keypad set to lock during 15 minutes after 10
successive false codes
Exit programming mode. All above data stored and
ready for use
or wait 10 seconds and retry.
12
user code in group 1 with
st
user code in group 1 with
nd
user code in group 1 with
rd
user code in group 2
st
user code in group 2
nd
user code in group 3
st
VELLEMAN