REFLECTS 51759 Manual Del Usuario página 19

8) Glue on the canopy rim.
With the small clothespins, line up the upper rim on the canopy supports.
This will take some practice to get it just right, so take your time!
Use the larger rim
Add the lower rim.
Line up the grooves!
Once it is nicely lined up, add
glue and clamp down. Start with
the top rim and work down.
It might take a bit of patience to
get it just the way you want it!
Make sure the support bars extend
about .5 cm - this way you can tie
the string to them.
The distance doesn't have to be
exact - it can vary a bit!
51759 AL.indd 20
Line it up and clamp
Nice, use a clothespin
to hold it on.
Important!
Each support
sticks out about
0.5 cm from the
rim.
1/2 way
across
the sup-
port.
Check for alignment
Top and bottom rim ends line up
with the edge of the support.
Let dry!
25.06.2013 14:07:20