Publicidad
Step 1
Assemble your unit on a carpeted fl oor or on the empty
å
carton to avoid scratching your unit or the fl oor.
Fasten a ROD HANGER (11) to the UPRIGHT (C). Use two
å
1/2" FLAT HEAD SCREWS (23) though the outer holes in
the ROD HANGER.
Turn two CAM SCREWS (7) into the UPRIGHT(C).
å
Flip the UPRIGHT (C) over.
å
Fasten the LEFT CABINET RAILS (2) to the UPRIGHT (C).
å
Use six 5/8" FLAT HEAD SCREWS (24).
5/8" FLAT HEAD SCREW
(6 used for the LEFT CABINET RAILS)
Page 6
Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
7
C
24
www.sauder.com/service
1/2" FLAT HEAD SCREW
(2 used in this step)
C
2
2
Roller end
0
23
11
429579
Publicidad
